Deskripsi Introduction PoE Solution for Breaking RJ45 100m Limitation PLANET POE-E202 is a 1-port PoE to 2-port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE application. The POE-E202 can obtain a maximum of 30-watt PoE power from PoE input port and supplies a maximum of 25-watt PoE power budget for two PoE output ports, extending both the Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to up to two 200m powered devices at the same time. The POE-E202 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter. Highlights Interfaces PoE IN 1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at PoE “Data DC power” in auto MDI/MDI-X, auto-negotiation RJ45 connector PoE OUT 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE “Data DC power” out auto MDI/MDI-X, auto-negotiation RJ45 connector Power over Ethernet PoE Standard “PoE In” Port IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD class 4 PD Per “PoE Out” Port IEEE 802.3at Power over Ethernet Plus end-span PSE IEEE 802.3af Power over Ethernet end-span PSE PoE Power Supply Type End-span (Type A) PoE Power “PoE In” Port 52~56V DC, max. 30.8 watts Per “PoE Out” Port 44~55V DC, max. 25 watts Power Pin Assignment “PoE In” Port 1/2 ( ), 3/6 (-); 4/5 ( ), 7/8 (-) Per “PoE Out” Port 1/2 ( ), 3/6 (-) Hardware Specifications Data Rate 10/100/1000Mbps MAC Address Table 2K Data Buffer 2Mbits Switch Architecture Store-and-Forward Switch Fabric 6Gbps Switch Throughput 4.46Mpps @ 64 bytes Jumbo Frame 10KB Flow Control IEEE 802.3x pause frame for full duplex Back pressure for half duplex LED Indicators “PoE In” Port: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green) “PoE Out” Port 1: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green) “PoE Out” Port 2: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green) Protection ESD (Ethernet): 2KV (TBD) Surge (EFT for power) : 2KV (TBD) Enclosure Metal Installation Wall mountable Power Requirements IEEE 802.3at compliant with voltage within 52V-56V DC Power Consumption 1.6 watts/5.5BTU (System on with PoE input) 2.2 watts/7.5BTU (Ethernet full loading without PoE function) 36 watts/122.8BTU (Full loading with PoE function) Network Cable 10BASE-T: 4-pair UTP Cat. 5 up to 100m (328ft) 100BASE-TX: 4-pair UTP Cat. 5 up to 100m (328ft) 1000BASE-T: 4-pair UTP Cat. 5e, 6, up to 100m (328ft) EIA/TIA-568 100-ohm STP (100m, 328ft) Standard Conformance Regulatory Compliance FCC Part 15 Class A, CE Standard Compliance IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3x Flow Control Environment Operating Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing) Storage Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) Ordering Information POE-E202 1-port 802.3at PoE to 2-port 802.3af/at Gigabit PoE Extender
