Cisco WAP131 Wireless-N Dual Band Access Point

Description Cisco WAP131 Wireless-N Dual Band Access Point The Cisco WAP131 Wireless-N Dual Band Access Point from Cisco provides a simple way to extend secure, high-performance mobile networking to your employees and guests, so they can stay connected anywhere in the office. This flexible solution lets you connect dozens of employees and can scale to accommodate additional users and changing business needs. The Cisco WAP131 Wireless-N Dual Radio Access Point uses concurrent dual-band radios for improved coverage and user capacity. The Gigabit Ethernet port allows the AP to be powered by PoE switch to help reduce cabling and wiring costs. Intelligent quality-of-service (QoS) features let you prioritize bandwidth, sensitive traffic for voice-over-IP (VoIP) and video applications. The Cisco WAP131 Wireless-N Dual Radio Access Point is easy to setup and use, with intuitive wizard-based configuration. An easy-to-use desktop design with an integrated stand allows you to place the AP on your desk vertically or horizontally. To enhance reliability and safeguard sensitive business information, the Cisco W AP131 Wireless-N Dual Radio Access Point supports both Wi-Fi Protected Access (WPA) Personal and Enterprise, encoding all your wireless transmissions with powerful encryption. In addition, 802.1x RADIUS authentications help keep unauthorized users out. 802.11n connectivity for 2.4 and 5 GHz clients Single Power over Ethernet (PoE) Gigabit Ethernet for connecting to PoE switch PD port allows access point to be powered by backbone switch Concurrent dual-band radio support for up to 300 Mb/s per radio to maximize capacity and coverage Single Gigabit Ethernet LAN interface enables a high-speed uplink to the wired network Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, helps protect sensitive business information Simple installation and intuitive web-based configuration and wizard enable fast, simple deployment, and setup Desktop design with integrated stand, for easy access and placement Intelligent QoS prioritizes network traffic to help keep critical network applications running Power-saving sleep mode and port control features help maximize energy efficiency Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades In the Box Cisco WAP131 Wireless-N Dual Radio Access Point with PoE AC Power Adapter Ethernet Network Cable Cisco WAP131 Specs General Standards IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460) Cabling Type Category 5e or better Antennas Internal antennas optimized for desktop installation with vertical orientation LED Indicators Power, WLAN, LAN Operating System Linux Quality of Service (QoS) Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS System Memory RAM: 128 MB Flash: 128 MB Minimum Requirements Switch or router with PoE support, PoE injector, or AC power adapter Web-based Configuration: Java-enabled web browser Interfaces Ports 10/100/1000 Ethernet, with support for 802.3af/at PoE, Power Port for AC adapter Power Supply External 12 V, 1.5 A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af/at PoE Buttons Reset button, Power (on/off), Push button Cable Lock Slot Slot for Kensington lock LEDs Power, Wireless, Ethernet Network VLAN Support Yes Number of VLANs 1 management VLAN plus 8 VLANs for SSIDs 802.1X Supplicant Yes SSID-to-VLAN Mapping Yes Auto Channel Selection Yes Spanning Tree Yes Load Balancing Yes IPv6 IPv6 host support IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc. Layer 2 Features 802.1Q-based VLANS, 8 active VLANS plus 1 management VLAN Security WPA/WPA2 Yes, including Enterprise authentication Access Control Yes, management access control list (ACL) plus MAC ACL Secure Management HTTPS SSID Yes Performance Wireless Throughput Up to 300 Mb/s data rate (real-world throughput will vary) Recommended User Support Up to 32 connective users, 16 active users per radio Configuration Web User Interface Built-in web user interface for easy browser-based configuration (HTTP/HTTPS) Management Management Protocols Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour Remote Management Yes Event Logging Local, remote syslog, email alerts Network Diagnostics Logging and packet capture Firmware Upgrade Firmware upgradable through web browser, imported/exported configuration file Dynamic Host Configuration Protocol (DHCP) DHCP client IPv6 Host Yes Wireless Frequency Dual concurrent radios (2.4 and 5 GHz) Radio and Modulation Type Dual radio, orthogonal frequency division multiplexing (OFDM) WLAN 802.11n 2×2 multiple-input multiple-output (MIMO) with 2 spatial streams 20 and 40 MHz for 802.11n PHY data rate up to 600 Mb/s Data Rates Supported 802.11a/b/g: 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mb/s802.11n: 6.5 to 300 Mb/s 20 MHz Bandwidth: MCS 0-15 for supported data rates 40 MHz Bandwidth: MCS 0-15 for supported data rates Frequency Band and 20 MHz Operating Channels A Regulatory Domain: 2.412 to 2.462 GHz; 11 channels 5.180 to 5.240 GHz; 4 channels 5.745 to 5.825 GHz; 5 channelsE Regulatory Domain: 2.412 to 2.472 GHz; 13 channels 5.745 to 5.805 GHz; 4 channels Nonoverlapping Channels Maximum Channels: @2.4 GHz; 802.11b/g; 802.11n; 20 MHz: 3 @5 GHz; 802.11a; 802.11n; 20 MHz: 9 @5 GHz; 802.11a; 802.11n; 40 MHz: 3 Wireless Isolation Wireless isolation between clients Internal Antennas Internal fixed PiFA antenna Antenna Gain In dBi Maximum antenna gain of 3.4 dBi on 2.4 GHz Maximum antenna gain of 4.5 dBi on 5 GHz Wireless Distribution System (WDS) Yes 802.11i Security Yes Multiple SSIDs 8 Wireless VLAN Map Yes WLAN Yes Wi-Fi Multimedia (WMM) Yes, with unscheduled automatic power save Operating Modes Access point Access Point mode, WDS Bridging, Workgroup Bridge mode Environmental Power Options IEEE 802.3af/at Ethernet switch Cisco Power Injector: SB-PWR-INJ2-xx (not included) AC Adapter: Included 12 V, 1.5 A PoE Peak Power: 7.42 W Compliance Safety: UL 60950-1 CAN/CSA-C22.2 No. 60950-1 IEC 60950-1 EN 60950-1Radio approvals: FCC Part 15.247, 15.407 RSS-210 (Canada) EN 300.328, EN 301.893 (Europe) AS/NZS 4268.2003 (Australia and New Zealand)EMI and susceptibility (Class B): FCC Part 15.107 and 15.109 ICES-003 (Canada) EN 301.489-1 and -17 (Europe) Operating Temperature 32 to 104°F / 0 to 40°C Storage Temperature -4 to 158°F / -20 to 70°C Operating Humidity 10 to 85% non-condensing Storage Humidity 5 to 90% non-condensing Physical Mounting Options Desktop Dimensions 6.7 x 6.7 x 1.4″ / 17.0 x 17.0 x 3.6 cm Weight 0.89 lb / 0.40 kg