(SINGLE) DENALI T3 Rear Switchback LED Turn Signal Pods
$ 91.30
- Description The rear T3 signal pods feature super bright red LEDs for run and brake functionality that also switch to amber when your turn signal is activated. Unlike other switchback turn signals, the T3s feature two separate rows of high-power single-color LEDs as opposed to weaker bi-color LEDs. The result is a shockingly bright light pod that rivals the intensity of auxiliary driving lights. While the T3s are available in a traditional turn signal housing, this low-profile modular signal pod is designed to be mounted to a variety of other locations on the rear of your vehicle. Rear mounting kits allow the T3 to be mounted to your number plate (most popular) as a stylist rear auxiliary brake light – mount underneath your license plate, or purchase two for a left and right side mount, operating as both brake lights and turn signals, either side of your number plate. This kit includes 2 self-tapping screws, so no additional mounting kit is necessary for flush-mounting applications! Or choose the optional extra T3 Light Mounting Kit for attachment to your license plate. The modular low-profile housing coupled with high power LEDs make the T3 the brightest and most versatile switchback turn signal on the market. Features Switchback Functionality: Red Run/Brake & Amber Turn Signal Run/Brake Circuit: 25% Run, 100% Brake 180-degree viewing angle Six high power LEDs (per pod) Low-profile design Easy connection to vehicle brake and turn circuit E-Mark approved run, brake and turn signal Connecting your Denali T3 Rear Switchback LED Pods HEX ezCAN Compatible – Use the HEX ezCAN accessory manager to connect and configure your Denali T3 Rear Switchback LED Pods. To connect 1x DENALI T3 Rear Switchback LED light pod to a HEX ezCAN accessory Manager, and to operate the T3 as a Rear Auxiliary Brake Light only, you will need a HEX ezCAN T3 Brake Light ADAPTER Cable. Mounted to the bottom of your license plate will also require a single T3 Light Mounting Kit for attachment to your license plate. To connect 2x DENALI T3 Rear Switchback LED light pod to a HEX ezCAN accessory Manager, and to operate the T3 as a Rear Auxiliary Brake Light and Turn Signals, you will need a HEX ezCAN T3 Brake Light SPLITTER Cable. To mount the 2x T3 Light Pods eaither side of your license plate, you will need two x T3 Light Mounting Kit for attachment to your license plate. T3 Switchback Rear Turn Signal/Brake Light Pods Specs Total Power Draw: 0.06A Run, 0.25A Brake, 0.55A Turn Signal Input Voltage: 12V DC Size: 2.9″ x 1.13″ x 0.5″ Weight: 0.08 lbs Raw Lumens: 870 Waterproof: IP67 What’s In The Packet? (1x) Rear Signal Pods (1x) Wiring pigtails with waterproof connectors (2x) Mounting screws (4x) Posi-Taps Download the Installation Instructions (for a pair) of DENALI T3 Rear Switchback LED Turn Signal Light Pods PLEASE NOTE: DENALI T3 Rear Pods are NOT currently compatible with BMW R1250GS/A bikes unless used with the HEX ezCAN. Please note that when powering rear T3s through a HEX ezCAN the red running light will remain illuminated between the amber turn signal flashing. This is an unavoidable result when powering T3s solely from a HEX ezCAN. If you’d prefer that the running light shuts off when the amber signal is active, simply connect the red running light wires from the T3 pods directly to a switched power source on your vehicle (and set the HEX ezCAN brake light circuit to brake only).
